On 1/14/2022 at 3:30 PM, tbonesullivan said: Nail Polish remover is dilute acetone, and should remove superglue. Definitely easier to work with than straight acetone, which often evaporates too fast to do any good. You can try scraping off the excess with a razor blade CAREFULLY before using the solvents. Thanks for the info. Step 1: Get Your Tools & Equipment. We’re going to use minimal tools and the most practical materials. Below we will discuss how we go ahead and use these. 220 grit paper – for sanding down the wood and removing any paint. 320 grit paper – for smoothing the wood ready for the first layer of primal paint. Tip if you like: “Water, alcohol, whatever you use could do something negative to your guitar.” Welcome to the down side. As easy as adding a sticker may be, removing it—without damaging your guitar—is significantly more tricky. And may create more problems than it solves as the finish underneath that sticker you want to scrape away may already be ruined. It will also remove the sticky sensation from your neck. Only use the 0000 steel wool and leave the rest for later. If you use more aggressive steel wool (000 or 00) you will most likely rub against the protective satin finish. The guitar’s finish should be removed. This guitar neck is made of Fender Telecasters from the early 1970s. . While removing the finish from your guitar can be a lengthy and involved process, it’s much simpler than many people think. By following our step-by-step guide, you can strip, sand, and refinish your guitar with ease, giving it a new lease on life in the process. Using Saran wrap, cover the face of the guitar you have applied the stripper to with the body of the guitar, and let it sit coated in stripper for at least 15-20 minutes, as instructed on the product. If you want to do your job, watch TV or listen to the radio – just give the chemical stripper some time. First, you need to disassemble the guitar, as you can’t risk damaging the sensitive parts of your guitar. Remove the strings and other parts of the guitar very gently and only leave the body. 2. Use Heat Gun. Plug in the heat gun and the real show starts here. NEW CHANNEL: Vigorous rubbing on a single scratch can cut through a finish quite quickly. It is rare that 100% of even tiny scratches can be removed. Some will inevitably be deeper than others. Removing 90% of the scratches is a very, very good result that can dramatically improve an instrument cosmetically.

how to remove finish from guitar